Nylon Lockout Hasp

a)Made from durable nylon,which is not easy to break.

b) Non-conductive body, applied to electric power isolation with high requirements on corrosive and explosion-proof places.

c) Allow multiple padlocks to be used when isolating one energy source.

d) Usage: pull it up and down.

Suitable for power isolation and lock, corrosive or explosion-proof places.

Lockout Hasps allow you to use one padlock or several padlocks to lock out all types of machines, as well as electrical panels, breaker boxes, and other electrical sources. These Lockout Hasps will not open unless every padlock is removed, when operations may safely resume. All Lockout Hasps comply with OSHA lockout regulations. Padlocks sold separately.

The Plastic Lockout Safety Hasp features spark proof, nylon material with a 2-1/2in (64mm) inside jaw diameter and can accommodate up to six padlocks. Ideal for lockout by multiple workers at each lockout point, the hasp keeps equipment inoperative while repairs or adjustments are made. Control cannot be turned on until last worker’s padlock is removed from hasp.

When one person is performing maintenance, only a normal padlock is needed for locking and tagging. When there are multiple persons performing maintenance, a safety lockout hasp must be used.

When the maintenance is completed, the person removes his padlock from the safety hasp, but the power is still locked and cannot be turned on. Only when all maintenance personnel have evacuated the maintenance site and all the padlocks on the safety lockout hasp have been removed , The power can be turned on. Therefore, the use of safety lockout hasp solves the problem of multiple people managing the same equipment and pipeline.