Insulated padlocks have always been a very good product for us and have been continuously developing. However, no matter how good a product is, it is inevitable that some minor problems will occasionally occur. As a manufacturer specializing in management in the new era of China, let’s analyze the common problems of safety padlocks and how to solve them!

The lock shackle does not jump: due to the large shape and position tolerance of the lock shackle, most of the lock shackles do not jump. Insert the key into the lock core, turn it to the open position, do not move it, and tap it gently with a small hammer;

The lock core does not turn: due to the large friction, it does not turn. The safety padlock is not used for a long time, the lock core and lock body are rusted, and a small amount of diesel and gasoline enters the lock core to solve the problem;

The key is stuck in the lock body: If the key breaks into the lock body from the root, you can directly clamp it with tweezers or other tools. If the lock core breaks from the middle, just remove the seven-hole sealing sheet on the lock body, and then seal it with aluminum wire to install it.

The key is blocked from insertion and removal: This is a problem caused by long-term use. You need to sprinkle some graphite in the keyhole. The commonly used graphite is pencil lead.